Somfy Dry Contact Programming Instructions

Somfy Dry Contact Programming Instructions
1. Remove the cover of Somfy Module Box
2. Connect led lights to dim box
3. Connect the power supply to DC 12-24V input cables
• If the power supply voltage is 12V, led lights must be 12V.
• If the power supply voltage is 24V, led lights must be 24V.
4. Apply voltage to Somfy Module 220V input.
5. Press the “Prog” button on the Somfy Module for 3 seconds and then check the red led light on the Somfy Module.
6. Press to button hole at the back of remote control with a thin screwdriver and check the red led light on Somfy Module is blinking.
7. Remote identification process to Somfy Module is completed after the blinking of red led light is finished.
8. On the remote control, press a few seconds to central button to turn on/off the led lights. Press up/down buttons for dim control.
9. Reassemble the cover of Somfy Module box to finish the process.
10. If you need to remove all the controls from the memory of Somfy Module, press the “Prog” button of the Somfy Module for 7 seconds, until the blinking of the red led light.