Simple Candle Holder made from Scrap Walnut

Over the holidays I made a number of these little candle holders for the family. I originally saw a similar project on Pinterest and enjoyed how simple they were.

The material is a really nice piece of Scrap Walnut that had some surprise figuring in it.

This is a really simple project, that doesn't require too many tools.

Start by measuring your matchbox and cutting a grove big enough to hide the matchbox.

In the video you will see me cutting a groove for the matchbox in the side grain, after having the candle holder for a while that was a mistake, It should have been done in the end grain to prevent the wood from warping and crushing the matches.

Next drill a 1.5" hole the depth of a tea light.

Sand until you're tired of sanding, and then apply the finish.

I typically use Tunge oil for everything that does not need to be food-safe but you can use your favorite finish.

I hope you enjoyed this one, and please if you haven’t already, please like 👍 and subscribe 😁

You can also check this out on the blog
https://imamaker.ca/2018/06/making-a-...

Share, Like, and Subscribe:
https://bit.ly/subMaker

Lend a hand!
Buy me a coffee - https://bit.ly/helpMaker
Amazon Store - https://bit.ly/shopMaker

Follow:
Instagram -   / heyimamaker  
Facebook -   / heyimamaker  
Twitter -   / heyimamaker  
Website - https://imamaker.ca/

Finishes Used:
Mineral Oil
Paste Wax

Tools Used:
Tablesaw
Incra Miter Gauges
Drill Press
Drill Bits
Square
Ruler
Pencil
Sandpaper


#giftideas #recycled #maker #woodworking #diy #reclaimed