etrailer | Review of SnowBear Snow Plow Parts - SnowBear Plow Parts - SB324-136

Click for more info and reviews of this SnowBear Snow Plow Parts:
https://www.etrailer.com/Snow-Plow-Pa...
Check out some similar Snow Plow Parts options:
https://www.etrailer.com/dept-pg-Snow...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Snow...
Hello, neighbor, Steve here with etrailer.com. Today, we're looking together at the replacement 2-Point Receiver Cup Crossmember for the SnowBear Plow systems. So, folks, this is a direct replacement for that SnowBear Plow system. You're gonna get one 2-Point Receiver Cup Crossmember just like you see before me, and I wanna go ahead and give you some overall dimensions. At the back here, side to side, 31 1/4. Let's flip it up here.

From outside edge to outside edge on the round tubes here, 33 inches exactly. The thickness of these brackets is a 1/2 inch, and the tube here in the middle is a two inch by two inch square tubing. And I wanna go ahead and zoom in here and give you a quick side view. So, you've got the mounting holes there, four on each side, and as you can also see, you've got that hole there in the round part there for that retaining pin. So again, folks, just a quick look.

This is all hardened steel, has a nice, beautiful black powder coat finish on it, so it should last for years and years to come in the elements. Well, folks, that's gonna wrap it up. Thanks for joining me today. I'm Steven, have a good one.