Click for more info and reviews of this HM28MR:
https://www.etrailer.com/p-HM28MR.html
Click for more info and reviews of this HM35KR:
https://www.etrailer.com/p-HM35KR.html
Click for more info and reviews of this HM44SR:
https://www.etrailer.com/p-HM44SR.html
Click for more info and reviews of this HM53GR:
https://www.etrailer.com/p-HM53GR.html
Click for more info and reviews of this HM55KR:
https://www.etrailer.com/p-HM55KR.html
https://www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: https://www.etrailer.com/tv-review-re...
Hey, everybody. Ryan here at etrailer. Today, we're gonna be checking out the REDARC Tow-Pro Liberty trailer brake controller. If your trailer has brakes, you're gonna need a way to apply them. That way, you can slow everything down safely. And that's where a trailer brake controller like this REDARC here is gonna come into play.
What this is gonna do whenever you hit the brakes, it's going to apply the brakes on the trailer, bringing you to a complete stop. One of the things that really sets the REDARC apart from some of the other brake controllers is the size. You know, it looks a lot different. The only thing you're gonna be able to see is the adjustment knob here. And the rest of the main body of the brake controller, I guess you'd call it, sits up behind the dash.
So, you're not gonna have this big box that's always in the way and an eyesore bolted up to your dash. And with this one, I think it turned out really good. We actually had some factory switches and whatnot here already. We had a blank one, so we we're able to mount this up in there. And so, it looks almost factory and a really clean appearance, and still really easy to get to.
One of the things with a brake controller like this as well is the fact that it's what's called proportional. So, what that means, more or less, however hard you apply the brakes, the trailer brakes are gonna match that. So, it just makes it a lot smoother and a lot better braking experience. So, to kind of give you an example of that, let's say, if you're going down the road and approaching a stop sign, and you're halfway on the brake, trailer brakes are going to do the same thing. On the other hand, let's say, if you're going down the highway, maybe an accident up ahead or something along those lines and you gotta really stand on the brake to slow things down, trailer's gonna do the same thing.
So, you're not gonna feel the trailer dragging or wanting to push you around. You're actually gonna be stopping as one hole unit. This particular brake controller is gonna be good for trailers that have either one or two axles. And there are some adjustments so you can change your brake force. So, you have the knob here. That's 10. That's zero. So at zero, you'd have no braking force. And so, you can kind of fine tune it. So, let's say, a good place to start is probably five or below. Let's say maybe you got a light trailer and nothing in it, you're gonna pick something up, you might only need a one or two, something like that. But then you load it up and realize it's not braking quite as hard as you'd like it to, you can always dial that up a couple clicks. So, you can really fine tune it for your particular load and what you're gonna be doing, and your particular driving style. It's also gonna have a manual override button and all you do is you just push down on this. And so, I'm actually hooked up to a test box, which simulates a trailer. That's why we're getting these lights going and everything. But you can see when you push down on this, that light's gonna glow red and that means you're gonna be just applying the trailer brakes. So, let's say, if the trailer starts to get swirly, kind of gets away from you a little bit, you can hit that, slow the trailer down, straighten it back out, and continue on. As far as installation goes, ours was not bad at all and I think that'll be the case for most people as long as your truck has a factory tow package. Essentially, all you gotta do is find the connector, plug it in, mount up the the box, and then mount up your knobs. So, it's more tedious than anything, but as long as you take your time, you should be in good shape. I do wanna mention, for those of you, if your truck does not have that factory tow package, so if you don't have the factory seven-way connector back there, you are gonna have to get a couple of other things, which is just probably gonna be rare for most of these vehicles. But we'll need a four-way flat trailer connector, etrailer.com universal brake controller install kit, and the REDARC universal adapter plug to make everything work. But like I said, chances are really good this info will get you going in the right directions. And that'll finish up our look at of the REDARC Tow-Pro Liberty trailer brake controller..
Информация по комментариям в разработке