#SLITTING

web : www.shreejicontrols.com
email : [email protected]
contact : 9033286966 / 9925838443


SPECIFICATIONS OF BOPP TAPE SLITTER MACHINE

1315 MM WORKING WIDTH


1. UNWIND STATION FITTED WITH SHAFT; CORE, CONE, CHECK NUT AND MANUAL BREAK MANUAL SYSTEMS FOR AXIAL MOVEMENT OF UNWINDER SHAFT.
2. MECHANICAL TYPE LAY-ON ROLL AT UNWINDER OPERATED BY MANUAL TENSION.

3. 1 SET STATUNERY BALANCER BLADE HOLDER WITH BLADE FIXING ARRANGEMENT MINIMUM CITTING SIZE 12 MM UPWARD.
4. 4 NOS. ALUMINUAM REWIND SHAFT 75 MM DIASS METER.

5. 2 NOS. TURRET REWIND STATION WITH MANUAL CLUTCH BREAK FOR TENSION CONTROL.

6. 2 NOS. EDGE TRIM WINDER WILL BE PROVIDING. (ON THE MACHINE SHAFT )

7. 1.0 HP DRIVE (ANY STANDERD MAKE) FOR TURRET REWINDER SYSTEM.

8. 5.0 HP A.C MAIN DRIVE L & T MAKE) WITH CONTROL PANEL WITH PRE-SETTABLE

9. ELECTRONIC LENGTH COUNTER, ON-OFF SWITCH, SPEED REGULATING, EMERGENCY STOP MCB CONTACTOR IN THE PANEL.

10. PULL ROLLER WILL BE OF 90 MM DIAMETER HARDCHROME PLATED KNURLING ROLL.

11. ALL ALLUMINIUM GUIDE ROLLERS ARE ANODIZED.

12. MS WALL OF 30 MM THIKNESS SIDE BODY

13. ALL MOTORS AND DRIVES WILL OF ANY STANDERD MAKE .

14. SLITTING MACHINE WAIGHT : 2200 KG. APPROX