Mandalorian - Start to Finish Armor Process with Graphite

Chapters and links to supplies used in the description below.

Complete finishing process from raw print to finished product using graphite as the primary coating technique. This method will allow you to use graphite without worry of finger prints and minimal rub off.

This video will cover all products used, prep methods, and demonstration of the process from start to finish.

I apologize for the length, lot to cover!

#Mandalorian #Cosplay #Graphite #3DPrinting #StarWars

Timestamps

0:00 Intro
3:12 Supply Overview
12:28 Primer Round 1
15:12 Sanding First Layer
21:41 Putty & Second Primer Coat
24:42 Sanding Second Layer
29:39 Sealer & Clear Coat
32:20 Next Phase Review
34:32 Clear Coat Wet Sand
37:52 Polishing Clear Coat
41:32 Graphite Pre-Wash
42:32 First Graphite Application
46:17 First Graphite Wash
48:37 Second Clear Coat
51:56 Final Graphite & Clean
56:11 Conclusion & Wrap Up

List of Supplies

- Sanding - Metal file, 180 sandpaper, wetsand paper 320, 600, and 2000
- Sanding Blocks
- Cotton pads
- Dust mask
- Rubber Gloves
- Microfiber Towels
- Orbital Buffing Wheel
- Primer, round 1 - Rustoleum Sandable Filler Primer, Grey and Black - https://www.amazon.com/Rust-Oleum-249...
- Primer, round 2 - Dupicolor Automotive Filler Primer, Grey and Black - https://www.amazon.com/Dupli-Color-DA...
- Sealer - Dupicolor Automotive Sealer, Grey - https://www.amazon.com/Dupli-Color-K0...
- Clearcoat - Dupicolor Perfect Touch Clear - https://www.amazon.com/VHT-BCL0125-Ex...
- Cleaner - Chemical Guys Clean Slate - https://www.amazon.com/Chemical-Guys-...
- Polish - Chemical Guys Optical Grade Polish #38 - https://www.amazon.com/Chemical-Guys-...
- Graphite - https://shop.chemicalstore.com/naviga...
- Bondo Spot Putty - https://www.amazon.com/Bondo-907-Glaz...