How to Replace Fuel Rail Pressure Sensor 2006-10 Ford Explorer

Buy Now!
New Fuel Injection Pressure Sensor from 1AAuto.com http://1aau.to/ic/1AFIN00028

The fuel tank pressure sensor feeds data about pressure inside the fuel tank to the EVAP system to determine if there are evaporative leaks in the system. A bad sensor will most likely trigger a check engine light for the EVAP system. This video shows you how to install a new fuel tank pressure sensor in your 2006-10 Ford Explorer.

• Check here for more videos on the 2006-2010 Ford Explorer    • Ford Explorer 2006-2010 4th Generation  

This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Pocket Screwdriver
• 10mm Socket http://1aau.to/oa/1AXAA00017
• Vacuum
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• T30 Bit http://1aau.to/oa/1AXAA00008
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/ob/1AXAA00044
• 1-1/16 Inch Wrench
• Paper Towels http://1aau.to/oa/1AXSS00035

Subscribe:    / @trq  

Check out our playlist:
Ford Explorer 2006-2010 4th Generation:    • Ford Explorer 2006-2010 4th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.