eMTB and MTB Coil Spring Calculator by BikeCo.com

Here's a give a quick explanation of what our new eMTB and MTB Coil Calculator at BikeCo.com provides users!

The new Coil Spring Calculator allows riders to compare FOX coil springs with varying Pre-Load settings. This allows users to see the spring rate cross-over to better determine an ideal coil spring setup for their DHX2.

In short: Pre-Load is the coil spring equivalent to volume spacers. Reviewing this calculator on BikeCo.com will highlight spring cross over between a lower LBS/IN spring with MORE Pre-Load compared to a higher LBS/IN spring with LESS Pre-Load.

While these springs have equal measurements at say 30% (or the sag measurement) the differences later in the coil's stroke are notable allowing riders to use springs with more or less support deep in the travel or bottom out support.

Check out the calculator at BikeCo.com!

https://bikeco.com/emtb-and-mtb-fox-c...