MacBook Pro, Air, iMac 2018 2019 2020 Permanent unlock iCloud By SCBO File www.biosunlocker.com

Описание к видео MacBook Pro, Air, iMac 2018 2019 2020 Permanent unlock iCloud By SCBO File www.biosunlocker.com

DONT TRUST THE SCAMMERS ON COMMENTS DOWN !!!
To Get urs Unlocked, Get To www.biosunlocker.com
We do all models, From 2012 Till 2020
DONT TRUST THE SCAMMERS ON COMENTS, contact only biosunlocker.com

UNLOCK PROCESS takes 24H TO 9 DAYS

To unlock remove the EFI/firmware password & iCloud on newer Macs, you must now follow these steps, If they don't work, start over from the beginning and make sure you follow each one exactly. If that still doesn't work, contact us via Chat.:


- Boot with Option key held to display the boot menu's firmware password prompt.- Press Control-Option-Command-Shift-S to reveal a 33-digit hash (mixed letters and numbers) that contains an identifier for your specific motherboard and the Atmel chip used for your system. In this hash, the first 17 digits are an identifier for the system's motherboard, and the last 16 digits are a hash for the password.-Submit HASH and SN to order page.

Note; Strictly check HASH and SN twice, because we can not refund wrong submited orders.

After you receive file you must follow next steps:
Format a flash drive GUID partition scheme and Mac OS Extended format. Name it Firmware
Download SCBO file to your Desktop.
Open Terminal.
Paste the following command into the terminal window and press enter:

cp ~/Desktop/SCBO-signed.bin /Volumes/Firmware/.SCBO

You should get a new line, no errors.

cp ~/Desktop/SCBO-signed.bin /Volumes/Firmware/._SCBO

You should get a new line, no errors.

The EFI password is now removed.After EFI is removed use your own bootable OS X and install it. First installation don't do over WiFi, no refund in case re-lock (re-lock could happen in some cases).

Eject the flash drive.
Turn off the computer.
Insert the flash drive.
Turn on the computer and immediately hold down the Option key.
You should see the lock symbol for a second and then it will restart to the Startup Manager.
If you see a PIN lock after these steps, reset the NVRAM with Command-Option-P-R.

Комментарии

Информация по комментариям в разработке