How to Replace Rear Brakes 2011-2016 Hyundai Elantra

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS02754

This video shows you how to install rear brake pads and rotors on your 2011-2016 Hyundai Elantra. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oaSU/1AXAA00013
• Impact Screwdriver http://1aau.to/obb/1AXAA00047
• Phillips Bit in a Ratchet http://1aau.to/oas/1AXAA00149
• Pry Bar http://1aau.to/oEN/1AXAA00020
• 12mm Socket http://1aau.to/oaRm/1AXAA00015
• 14mm Socket http://1aau.to/oaRm/1AXAA00015
• 21mm Socket http://1aau.to/oVx/1AXAA00043
• Brake Caliper Hanger http://1aau.to/ofn/1AXAA00084
• Brake Caliper Piston Rewind Cube Tool http://1aau.to/os/1AXAA00061
• 1/2 Inch Breaker Bar http://1aau.to/oop/1AXAA00078
• 1/2 Inch Ratchet http://1aau.to/oVx/1AXAA00043
• 3/8 Inch Drive Ratchet http://1aau.to/oaRm/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oadJ/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• sanding disc
• Floor Jack http://1aau.to/oKV/1AXAA00068
• Jack Stands http://1aau.to/oIm/1AXAA00065
• Large Hammer http://1aau.to/oHG/1AXAA00091
• Wire Brush http://1aau.to/on6/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.