Remove High Pressure Power Steering Hose and Nut In Hard To Reach Area

See how I removed the High Pressure Power Steering Hose in a hard to reach area on a Chrysler Crossfire without taking off the engine motor mount. Click on SHOW MORE for all tools used and for each specific setup utilized. Please 👍👍👍 & 🔔 Subscribe if this video helps.
👉👉👉

Normally removing a power steering hose is easy, but in some cars it could be hard just to access. This video shows you how to access it, and hopefully help you to replace the hose with ease even if the hose and its nut are in difficult areas to get to and remove.


If you need to see first where and how to pinpoint your power steering leak, then you can check out this quick video here: 👉👉👉    • How To Find A Power Steering Leak 💧 I...  


Their are about 30 tools and parts you will need to gather:


Floor Jack https://amzn.to/3oLllOd
Jack Stands https://amzn.to/3l1Npuk


Oil drain pan https://amzn.to/35WWaQk
Syringe Pump https://amzn.to/3cLCsM3
Oil funnel https://amzn.to/3jPgJD9
Recyclable container or empty jug
ATF https://amzn.to/324RzKS
Mineral Spirits Turpentine https://amzn.to/2UNxPuJ


Shop Towels https://amzn.to/3kNSKpi
Gloves https://amzn.to/2HWG9BJ
Kneepads https://amzn.to/3kMe0eW
Flashlight


Breaker Bar 3/8" https://amzn.to/3oQGTJx
Ratchet Wrench 3/8" https://amzn.to/2JiEG9d
18 MM wrench https://amzn.to/3yijm7R
Crowfoot Wrench set standard https://amzn.to/3jcrDWp

Adapter set https://amzn.to/3bk8qOi
Universal Joint swivel Adapter set https://amzn.to/33CHhSi

1/4" Extension set https://amzn.to/3kMaLEl
3/8" Extension set https://amzn.to/37GTLeJ
Flat Tip Screwdriver https://amzn.to/3wbHuZd

Torque Wrench 3/8" https://amzn.to/3jLg4CN


Power steering oil to choose from (Make sure the oil is compatible with your vehicle before purchasing):

Pentosin 1405116 CHF 11S Hydraulic fluid https://amzn.to/3A5mYLM
Lucas Oil Power Steering https://amzn.to/3fqq5pE
Prestone PS Fluid https://amzn.to/3jecS4c

These tools help determine where your leak is:
UV Flashlight https://amzn.to/3C9fSHB
UV Dye https://amzn.to/3ifbDm6



Actual part that needs to be replaced:

Power Steering High Pressure Hose
This is the one I used on this Mercedes or Crossfire Car:
➡️➡️➡️ https://amzn.to/3dWpEFw





These are the 3 setups you need to make depending on where you are in removing the power steering hose:

Setup 1: will help in loosening the nut

You need this in this order from top to bottom a:
18 mm or 11/16" Crow Foot wrench
1/4" to 3/8" adapter
1/4" swivel joint
1/4" Extension that is 6" long
1/4" to 3/8" adapter
3/8" extension that is 10" long



Setup 2: allows you to easily turn and remove the PS nut fully from the engine area

18mm or 11/16" Crow Foot wrench
3/8" extension that is 3" long


Setup 3: is used to fully tighten the nut when reinstalling the new power steering high pressure hose

18 mm or 11/16" Crow Foot wrench
3/8" to 1/2" adapter
1/2" breaker bar that is at least 12" long



If you would like to help support and grow this channel you can get me a cup of coffee ☕ here: ➡️ https://www.buymeacoffee.com/randomca...
OR
➡️ https://ko-fi.com/fixcaryourself

AND/OR make videos you think can help others.



Remember to always think how to be crafty as their may be other ways to accomplish a task like this power steering nut trick without taking off anything else off underneath the car.


Thanks for watching and learning. Let me know your thoughts in the COMMENTS below.


👍 & 🔔 #fixcaryourself