Скачать или смотреть 10 Tips for Hardware Mounting a Top of Stair Baby Gate

If your needing a top of stair baby gate, it's highly recommended that you that you a hardware mount for any baby gate for top of stair use. MY WEBSITE http://www.householdimprovements.com/...
MY FACEBOOK PAGE   / babygatereviews  
MY BLOG http://preventingbabygateinjuries.blo... You can read full version of article below.

10 Tips for Hardware Mounting a Top of Stair Baby Gate

The top of the stairs is one of the most dangerous places in your house for your kid who is just learning to walk or crawl. While the need to secure top of your staircase need no emphasis, it's imperative to mention the top of stairs baby gate is the ideal gate to secure openings located at the topmost part of the stairway.
However, that is not all there is to say; you need to install a hardware-mounted gate that is much stronger compared to the pressure mounted gate. In order to ensure the unit you install provides maximum safety here are a few tips that will come in handy.

1. Decide Whether You Want a Mounting Kit… Most baby gates for stairs are mounted to the wood trim of the doorway directly. However, if you do not want drill the existing wood with screw holes, you may consider using a mounting kit. In case you are mounting the gate on a dry or plaster wall, you may be forced to screw the unit to the wall. Never attach a hardware mounted gate directly to drywall or plaster since the gate won’t be strong and may fail in functionality with time.

2. Measure the Opening… Before you even think of mounting the baby gate, you have to measure the opening where you will install it. This will give you a clue about the size of the gate that is to be mounted. Different stairways have openings that vary in dimension thus, the need to have the exact measurements is imperative. Failure to take the measurement means that you might end up mounting gate that doesn’t fill in well thereby compromising the safety.

3. Decide the Opening Direction… You need to mount the gate in such a way that it opens in the direction that is safe for the child and yourself. Ensure that the top of stairs baby gate opening direction is convenient for your movement as well. In addition, ensure the direction is in such a way that even when the child pushes the gate hard, it cannot open.

4. Look at the Safety Standards… There is more to mounting a baby gate for stairs than just blocking the stairways opening. While installing, ensure that the gate is in tandem with the set safety regulations and standards. Remember that the primary reason for fitting the gate is securing your child and if the gate doesn’t meet the set safety regulations you’re mounting it at your risk.

5. Test the Gate… Mounting the gate is not enough. You need to check it to not only make sure it is working but is strong as well. Shake it mildly, the same way your child would when they play with the door. By testing the gate, you will get a chance to re-mount it correctly if you feel it is not as strong as it should be.

6. Consult the Manual… Different safety gates for stairs will have different mounting method. Even if you have dealt with hardware mounted gates before, it doesn’t hurt consulting the manual to ensure you get the process correctly.

7. Adjust the Gate After Mounting… After fitting a top of stairs baby gate, you need to adjust the ends to ensure they are in full contact with the wall. Leave no gaps between the wall and the gate as this might compromise the safety besides giving the young one foot and handholds to climb over their gate.

8. Replace the Gate if Need Be… As mentioned earlier on, the top most part of the stairs is overly hazardous. If by chance you feel that the stairway baby gate you are mounting doesn’t address your child’s safety needs, consider replacing it with a better model. Never fit a gate that you are not comfortable with as the consequences might be fatal.

9. Durability Matters… Unlike pressure mounted baby gates that are used temporarily to block openings, hardware mounted gates are used to block openings on a permanent basis. It is, therefore, imperative that you fit the top of stairs baby gate that will last for long. A long lasting barrier is more likely to serve its purpose that a gate made from non-durable materials.

10. Ask Whenever in Doubt… Not everyone has the knowledge of hardware mounting on the top of stairs baby gate. Don’t take chances if you don’t know how to hardware mount a safety gate. It is recommended that you seek advice whenever you are in doubt even if it means calling or e-mailing the manufacturer for clarifications.