Siser EasyWeed Glow in the Dark - Heat Transfer Vinyl is also Sublimation Friendly!

Siser Glow in the Dark Heat Transfer Vinyl
https://creativedesignsupply.com/sise...

Using Siser Glow in the Dark Heat Transfer Vinyl (HTV) to create unique designs on fabric is a fun and creative process. Here's a step-by-step guide on how to use this vinyl with a heat press or an iron:

*Step-by-Step Instructions:*

1. *Design and Cut:* Create your design on your computer using design software compatible with your cutting machine. Make sure the design is mirrored (flipped horizontally) if it contains text or needs to face a certain direction when applied.

2. *Load the Vinyl:* Load the Siser Glow in the Dark HTV into your cutting machine. The glossy side of the vinyl should be facing down on the cutting mat.

3. *Cut the Design:* Use your cutting machine to cut out your design. Adjust your machine's settings based on the type of vinyl and the intricacy of the design.

4. *Weed the Design:* After cutting, carefully remove the excess vinyl (known as "weeding") to reveal your design. You should be left with only the parts you want to transfer onto your fabric.

5. *Preheat the Heat Press or Iron:* Preheat your heat press to the recommended temperature for Siser Glow in the Dark HTV (usually around 305°F or 150°C). If you're using an iron, set it to the cotton setting with no steam.

6. *Position the Design:* Place your fabric on the heat press or a flat, heat-resistant surface if you're using an iron. Ensure it's smooth and free from wrinkles.

7. *Apply the Design:* Position your weeded design on the fabric, with the clear, heat-resistant carrier sheet facing up. Cover it with parchment paper or a Teflon sheet.

8. *Heat Press:*
- Close the heat press and apply even pressure.
- Set the timer according to the vinyl manufacturer's recommendations (usually around 15-20 seconds).

9. *Iron:*
- Place a cloth over your design to protect it from direct heat.
- Press the iron firmly over the design, applying even pressure for about 15-20 seconds. Be sure to cover all parts of the design.

10. *Peel the Carrier Sheet:* After heat pressing or ironing, allow the vinyl to cool for a few seconds. Gently peel off the clear carrier sheet while it's still warm. If the vinyl is lifting with the carrier sheet, press it again with more heat.

11. *Enjoy the Glow:* Your Siser Glow in the Dark design is now applied to your fabric. Expose it to light to activate the glow properties. The vinyl will glow in the dark when the lights are turned off.

12. *Care Instructions:* Always follow the manufacturer's care instructions. Typically, you can machine wash the garment inside out, using a gentle cycle, and tumble dry on low heat. Avoid using bleach.

These steps should help you successfully use Siser Glow in the Dark Heat Transfer Vinyl to create fun and unique designs on your fabric items.
#sublimation #sublimationhack #creativedesignsupply