Build the right Vibration Table for your Project

I am in the process of making some cast cement parts and bubbles are a total bummer, brah! To get rid of the bubbles I built 2 vibration tables. The first table turned out to be too small for my needs… the second table was just right. I demo both tables and talk about what might be perfect for your project. The cost of each build was between $50 and $100 depending on what you have on hand. The premium DIY vibration dampening rubber feet are a little pricey ($30 for the rubber) but those can be replaced with springs if you want.

FYI when working with concrete or any dust producing materials you should be wearing gloves and a mask. Safety first!

If you have any questions or comments, do let me know in the comments. I will help when I can.

Shopping List: Buying from this link helps support the channel!
Rubber for vibration dampening feet
Smoothon Ecoflex 00-30 - https://amzn.to/3Gkt4dX

Motor for Large table (I got mine on sale for $35)
https://amzn.to/3r6wlJs

Nylon Lock Washers are recommended

Insert (rivet) Nuts used on Small table 3D printed housing
https://www.mcmaster.com/95105a143

3D Prints Links:
Mold for Rubber Feet
https://www.thingiverse.com/thing:468...

BUY the 3D printed mold from here if you don't have a 3D printer:
https://www.etsy.com/listing/1210666058

3D printed Housing (Uses 3” deck screws for attachment)
https://www.thingiverse.com/thing:468...

I'm now on Patreon!!! The reward levels are very basic for the time being but I promise to bring merch and other perks in the near future.
  / the3dhandyman