BroncoBikini.com - DIY Bronco6g HardTop Hoist on Track (under 2 minute removal)

Using my $150 ceiling chain hoist system on a sliding rail, installing my hard top in less than 2 minutes (including backing in my car !!!)

Track - LOWES: Adamax 10-ft 12-Gauge Electro-galvanized Half Slot Channel Strut
Trolley - EBAY: (this is the only trolly that will fit) "1-5/8 4 Wheel Heavy Duty Metal Frame Strut Channel Trolle"y - Uni/Super-Strut
Straps - AMAZON: Hammock/Tree Swing Straps 10 feet (get the one with the sewn in loops)
Hoist - AMAZON: YATOINTO Chain Hoist 1/4 Ton (550Lbs) Capacity
5 Lag bolts + 2 end bolts + shackle/quicklink (homedept/lowes)

(option) Electric Hoist - (amazon) $80
(option) Trolley's for electric hoist - (amazon) $60

Make sure the channel strut is straight ! If it is slightly bent your trolly may bind up in it.
Take your trolley to Lowes and test them out...trust me !!

YOU MUST get that trolley from Ebay, as it will bypass your lag bolts that hold your strut up. Any other trolley will hit the lag bolt heads.

Then just lag bolt your strut to your ceiling JOISTS, and dont forget to drill and insert bolts at the end of the strut to act as stops, so your trolly doesnt go flying off ! :)

Full Write Up here:
https://thebronconation.com/general-b...