How to Replace Valve Cover Gasket Set 2003-2007 Honda Accord 3.0L V6

Buy Now!
New Valve Cover Gasket Set from 1AAuto.com http://1aau.to/ic/1AEGS00343

This video shows you how to install a new valve cover gasket set from TRQ on your 2003-2007 Honda Accord (3.0L V6). Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!

Estimated installation time for a professional technician is approximately: 2 hours 18 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obNz/1AXAA00013
• 10mm Socket http://1aau.to/obR9/1AXAA00017
• 12mm Socket http://1aau.to/ocjL/1AXAA00015
• Seal Puller http://1aau.to/ot/1AXAA00040
• Pliers
• Ratchet http://1aau.to/ocjz/1AXAA00016
• Torque Wrench http://1aau.to/obnf/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oS3/1AXSS00035
• Gloves http://1aau.to/obqD/1AXSS00048
• Safety Glasses
• 6mm Hex Socket
• Razor Blade / Gasket Scraper
• Wire Brush http://1aau.to/ozG/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.