Скачать или смотреть Dry Bath Incubator,Block Heater,with Cooling Heating,DH-10S,DH-20S

Product Introduction
DH-10S / DH-20S Dry Bath Incubator Increase lab versatility with the Ultraven dry baths / block heaters,which offer a range of configurations with interchangeable modular blocks for a variety application needs.
Available with touch screen controls, our units provide outstanding temperature uniformity and stability that help create the reproducible results that you need.
It is widely used for sample preservation and reactions, DNA amplification and electrophoresis pre-denaturation, as well as serum coagulation.
Product Features
Temperature and time displayed on the touchscreen
Simultaneous display of set temperature and real-time temperature
Temperature control time is adjustable
Programmable five-point temperature and time settings
Constructed with aluminum alloy metal module
Metal module is easy to replace and clean
Temperature deviation calibration
Buzzer alarm prompts when temperature control time ends
Application Range
·Sample preparation
·Enzyme preservation
·Enzyme-substrate reactions
·DNA amplification
·Electrophoresis gel degeneration
·Serum coagulation
Technical Parameters
Model DH-10S / DH-20S
Temperature control range R.T +5 ~100 ℃ / R.T -25 ~100 ℃
Display method 4.3inch high-definition capacitive screen
Control Method Full-screen TFT touch
End or Fault Alarm Prompt Available
Temperature Calibration Available
Dynamic Temp or Time Display Available
Time Setting 1 min ~ 99h59min or continuous operation
Temperature Control Accuracy ≤ ±0.5 ℃
Display Accuracy 0.1 ℃
Block Temperature Uniformity ≤ ±0.3 ℃
Heating Time ≤15 minutes (from 20℃ to 100℃)
Cooling Time ≤15 minutes (from 100℃ to 20℃)
Multi-point Programming Available (up to 5 sets selectable)
Standard Centrifuge Tube Block 1.5/2ml × 35 wells
Power Input 100–240V / 50–60Hz ~ 1.0A