Michael's 2016 Minimoog Reissue Repairs/Mods (by synthpro)

Hey Guys,
In this video I take you along the adventure of making repairs to a 2016 Minimoog Reissue that was having troubles. Found an assortment of little issues as well as did some things to help the tone just a bit.

Here is technical info that may be helpful:

For those needing replacement power supply, the Mean Well Part # is P25A14E. (Note: plug will have to be modified with a female XLR 4 pin)
Pinout of XLR 4 pin:
Pin 1= -15V
Pin 2= +15V
Pin 3= Ground
Pin4= +5V
This Mean Well supply is already discontinued but as long as you get a supply with these current specs, it can be modified to work:
+5V= 2.5A
+15V= 500mA
-15V= 300mA

Screws for the interface boards, Power supply, and keyboard circuit board: #4-40 1/4"
These are the screws without lock washers so I recommend installing some or using some medium strength thread lock.

Thanks for watching!

Sincerely,
Jareth