Connecting Phase DJ to Algoriddim's Djay Pro DVS (on iPhone) using a DJM S7 Mixer

In my case, Djay Pro AI DVS wasn't detecting the Phase DJ signal after plugging everything in. The missing step (for my S7 atleast) is that you have to use a laptop to open the S7 Settings Utility (in your Applications folder) and change the channels from 'Phono' to 'Line' in order for the Phase signal to be detected when calibrating in Djay Pro.

*Note that after you turn off your mixer, you will have to use the S7 Settings Utility on your laptop to change the channels to 'Line' again. I'm not sure if this is specific to the S7 mixer only, but it resets every time after shutting down. Other mixers might not need this same process when using Phase and Djay with it. It would be ideal for Pioneer to create an S7 Settings Utility app for iOS, so that a laptop isn't needed just to change the channels back to 'Line' each time. Hopefully this helps for anyone else who was stuck at the same step I was!

0:17:13 - S7 Settings Utility
1:22:16 - iPhone/iOS | Phase Calibration
2:43:20 - Test Run
4:17:02 - Last notes

*****
Check out some of my mixes, shows, and stream VODs on my site
www.dennisinfante.com