Скачать или смотреть Tool Change Angle & Second Tool Change Point Adjust

In this video, we walk you through two essential calibration steps on your CNC machining center:

NC: Mitsubishi

(1) Tool Change Angle Adjustment and
(2) Second Tool Change Point Setting

Follow each step carefully to perform accurate adjustments safely and correctly.

► Tool Change Angle

Insert the positioning end piece into the spindle groove

Press MAINTE

Enter password MAPARA

Go to SETUP → PARAMETER → PARAMETER SEARCH

Enter 3108

Parameter 3108 = Spindle tool change angle

Enter the desired angle to complete the setting

► Second Tool Change Point

Remove the positioning end piece

Install the tool

Go to parameter 2038 (second tool change point)

Enter the desired value

Attach the tool calibration fixture to the tool arm

Use the hand wheel to lower Z-axis until the gap is approx. 0.2 mm

Insert the metal plate to confirm alignment

If the plate fits smoothly, the second tool change point is correctly set.

If you need further support, feel free to contact us at any time.

#CNC #machine #center #tutorial #mitsubishi

Website: www.maple-tech.com.tw
Email: [email protected]
Facebook:   / mapletech200  
Instagram:   / mapletechnology  
Linkedin:   / mapletech200