SINGER 4432 HEAVY DUTY SEWING POWER

HEAVY DUTY SEWING POWER

IN THIS VIDEO WE ARE GOING TO COVER A LOT OF GROUND.

00:00 INTRO - HI THERE! IN THIS VIDEO WE ARE GOING TO COVER A LOT OF GROUND!
WE WILL:
CHANGE THE NEEDLE.
CHANGE TO THE ZIPPER FOOT.
INSTALL BOBBIN.
PAIR THREADS FOR SEWING.
SHOW THE FEED DOG DROP DOWN ADJUSTER.
DISPLAY THE INCLUDED ACCESSORIES.
DO A SEWING TEST ON DENIM.
01:20 THANK YOU FOR VIEWING. THIS IS THE END OF THE INTRO; ENJOY THE REST OF THIS INFORMATIVE VIDEO!
07:40 THERE IS OUR PEDAL. REMOVING THE PEDAL FROM THE WRAPPING.
08:00 INSTRUCTIONS ON PLUGGING IN & POWERING ON.
08:35 THE TENSION CONTROLLER DIAL SET AT #4.
THE NEEDLE POSITION DIAL SET TO CENTRE.
THE STITCH LENGTH DIAL SET TO 3.5.E
STITCH MODE DIAL SET TO DEFAULT.
12:25 FEED DOG DROP DOWN ADJUSTER.
13:15 READY TO START THREADING.
13:30 THE BOX OF PRE-LOADED BOBBINS.
14:10 INSTALL BOBBIN.
14:30 INSPECTING THE ACCESSORIES.
16:55 THE VERTICAL SPOOL PIN IS INSTALLED & I AM USING A BOBBIN OF BLACK THREAD FOR THE NEEDLE THREAD.
17:30 THE THREAD IS SEATED IN THE #2 GUIDE.
17:55 MOVING THE THREAD FROM #4 UP TO #5, THE TAKE-UP LEVER. THE THREAD IS SEATED IN THE THREAD TAKE-UP LEVER AND I PULL IT DOWN TOWARDS THE 2 THREAD GUIDES & N EEDLE EYE.
18:45 CHANGING FROM THE 15 X 1 14 GAUGE NEEDLE TO THE 16 GA.
19:30 USING THE ACCESSORY SCREWDRIVER TO LOOSEN THE NEEDLE CLAMP SCREW.
21:00 INSTALL #16 DENIM NEEDLE.
21:30 THE FLAT SIDE OF THE NEEDLE GOES TOWARD THE BACK.