Bach Stradivarius SN# 38535 MLV 72 Vindabona (Circa 1966)

The Bach Stradivarius "Vindabona" Bb trumpets are made with a progressive or conical bore, rather than a cylindrical bore. The top leg of the tuning slide should measure .444" and the bottom leg should be .453". Then, there are .453" 'filler' tubes installed until you get to the .459" valve casing and slides. The #72 standard weight bell fitted to the Vindabona should read .462" at the tail. Early Elkhart Bach Stradivarius Vindabona (MLV 72), SN# 38535 (Circa 1966) Bach's version of a rotary sound, more conical in nature, step bore. 43 lead pipe (unmarked). Lacquer condition is great. Recently cleaned and inspected by Chuck McAlexander in NYC-- According to him, the lacquer is not original but a pro job. No dents or dings, but evidence of bell repair. Some lacquer loss and scratches. All slide work nicely. 459" Medium-large bore, yellow brass one-piece hand-hammered #72 bell, standard construction #43 mouth-pipe, monel pistons, Great Compression. Valves and slides are perfect! Has a great ring and a big dark sound. It feels and sounds great. Rare trumpet indeed of this vintage. Wynton, Brian Lynch and Dave Ballou. . .. are all guys who have played Vindy's similar to this. No red rot. Comes with Original Case This horn is a dream! SN# 38535 places the Manufacture date around 1966. (one year Vincent Bach after the move from Mt Vernon) I think the trumpets were made better around that time. Below are just a few reasons why: Valve Casings It is generally understood that prior to S/N 121,7XX (approx. 1977), valve casings were made from 2 pieces. The top part was made of nickel silver. (The original heavy weight horn!) This horn has Metal Valve guides The metal (brass) valve guides were replaced with nylon plastic guides during the 1980's. This was done for further cost/performance reasons. Bell Construction - Thickness On older Bach trumpets the bell thickness is tapered as the bell flares out. Today, through modern manufacturing techniques, the bell thickness is much more uniform, allowing for similar sound vs. daily manufacturing variations. This is one reason why older Bach trumpets often have a different sound to them. Source ........ http://www.bachloyalist.com/trumpet/t... More pictures upon request.