Seep PM2 Points Motors.

Seep PM2 Points Motors.

Video V.28

In this video I look at installing Seep PM2 point on to the existing track work with an experiment to use 16v as my point power to understand how these perform - My advice after concluding this test I invested into a CDU discharge unit as it provides a punch for point changing without the buzz.
A unit will power many points if not thrown at the same time. (dependant on layout size.)

Don't forget you will need to use On / OFF / ON toggle switches to throw the points as the switch needs to settle to the Off position.

Advantages
Good clean point action. Can operate two motors at the same time.
Very reliable. CDU powered Recommended.
Very reasonably priced as a product.

Disadvantages
Fast change over.
Click noise as they change.
A little tricky to instal but think anything like this sits under this comment.

My Rating
9 out 10
From a product and performance angle these are great and I still use these today, Aside a little noisy on change over.

But these still do the job as intended at a fraction of the cost. I would certainly recommend these.

Prototypical view.
** If you're looking from a prototypical angle then a quieter - slower option may be need to be considered.


Don't forget you can follow my journey here on YOUTUBE and at www.cheekytek.com as I progress deeper in to the realms of railway modelling.

All the Best Garry.