How To Install Solid Tires for Bikes Rubber Inner Tubes Bicycle No-Inflate Never Flat Airless DIY

How To Install Solid Rubber Bike Tire Inner Tubes! Installation of Solid Rubber Bicycle Tires Tyres Never Flat Inner Tubes! How To Replace Bell Solid No-Inflate Bicycle Inner Tubes Will Never Go Flat. Tannus Shield Flat Proof Aither Nexo New Tech Air-Light NEXELL StopAFlat Schwalbe Airless Tyres Replacement Pneumatic. Applies to most bike/bicycle brands: Schwinn, Huffy, Hyper, Next, Mongoose, Dynacraft, Kent, Tony Hawk, BCA, Roadmaster, Giant, Trek, Specialized, Scott, Cannondale, Bianchi, GT, Merida, Fuji, Cervelo, Pinarello, Santa Cruz, Colnago, Cruiser, Speed, Margaritaville, Bayside, Kona & Schwinn. EASY Step by Step installation instructions! Instructions also apply to other bikes!

►Support the Channel & Purchase WorkingWithWimberley Apparel!◄
https://teespring.com/stores/workingw...

As an Amazon Associate I earn from qualifying purchases

Solid Inner Tube: https://amzn.to/37n64dD
Craftsman Socket Set: https://amzn.to/37fwBZW
GoPro Hero 7 Black (What I Use to Record): https://amzn.to/2NCDCwf

► Subscribe: https://www.youtube.com/WorkingWithWi...
► Website: http://www.workingwithwimberley.com
► Instagram:   / workingwithwimberley  
► Facebook:   / workingwithwimberley  
► Twitter:   / wkwithwimberley  
► YouTube:    / workingwithwimberley  

STEPS:
1. Remove rubber brake stops
2. Loosen the wheel nuts using 5/8” socket and ratchet
3. Remove the wheel
4. Use a phillips screwdriver to press on the valve stem and remove the air
5. Use a flathead screwdriver to pry off the tire
6. Pull the inner tube out of the wheel
7. Insert the solid inner tube into the tire
8. Press the inner tube into the rim
9. Start to bead the tire on the rim by hand
9. Use flathead screwdriver to seat the tire bead
10. Reinstall the wheel onto the bike
11. Tighten the wheel nuts
12. Reinstall the rubber brake stops

TOOLS USED:
1. Phillips screwdriver
2. Flathead screwdriver
3. 3/8" Ratchet
4. 5/8” Socket
5. 10mm Socket

This is a how-to video for the “Do-It-Yourselfer” working in the home, driveway or garage. No fancy or crazy expensive tools. I'll show you step by step how to get the job done!

*If the video was helpful, remember to give it a "thumbs up" and consider subscribing*

Music by @tru_inferno: https://truinferno.bandcamp.com

Disclaimer:
Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, I cannot guarantee against improper use or unauthorized modifications of this information. Steven Wimberley & WorkingWithWimberley assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Steven Wimberley & WorkingWithWimberley recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Steven Wimberley & WorkingWithWimberley.

How To Install Solid Rubber Inner Tube Tire for Bicycle Bike Bell No-Inflate Never Flat Installation #workingwithwimberley episode 14