Скачать или смотреть Awesome Soda Refill Compilation POV ASMR Getting Drinks at Soda Fountain Coke Pepsi Dr Pepper Sprite

Soda machines (specifically, commercial fountain dispensers or "postmix" machines) are surprisingly sophisticated, operating on a principle of instant mixing. They don't store finished soda; they combine the ingredients on demand.

Here is a breakdown of how they work:

⚙️ The Core Ingredients

A fountain soda machine requires three main components, all kept separate until the moment you push the lever:

1. *Water:* Usually chilled and filtered tap water.
2. *Syrup:* A highly concentrated flavored syrup (like cola, lemon-lime, etc.) that typically comes in a *Bag-in-Box (BiB)* container.
3. *Carbon Dioxide ($\text{CO}_2$):* Pressurized gas stored in a large tank.

---

💧 The Internal Process

The machine's internal system processes these ingredients before they are mixed.

*1. Carbonation:* This is where the fizz comes from. Water and $\text{CO}_2$ are sent into a *carbonator**—a sealed, pressurized chamber. The high pressure forces the $\text{CO}_2$ gas to dissolve into the cold water, creating **carbonated water* (or soda water).
Crucial Point: The water must be kept very cold because cold water absorbs $\text{CO}_2$ much more efficiently. This prevents the resulting soda from being "flat." The water and syrup lines are typically cooled by passing them over a *cold plate* that sits on a bed of ice in the dispenser unit.
*2. Syrup Delivery:* The syrup is pumped from the Bag-in-Box container, often located in a cabinet below the counter, through thin tubes and up to the dispenser nozzle.
*3. Dispensing and Mixing:* This is the "magic moment" at the nozzle.
When you press the lever, two separate valves are activated for the selected drink: one for the *carbonated water* and one for the corresponding **flavored syrup**.
The two liquids are dispensed through separate lines that converge and mix together right at the nozzle or fountain head, typically at a pre-set ratio (often around 5 parts water to 1 part syrup).
The release of the highly pressurized carbonated water back into normal atmospheric pressure is what causes the dissolved $\text{CO}_2$ to turn back into gas and form the bubbles, creating the satisfying fizz.

---

💡 Why this system?

This "postmix" (mixing after the components leave their source) system is used for several key reasons:

*Efficiency:* It's much cheaper and more space-efficient to transport and store concentrated syrup bags and $\text{CO}_2$ tanks than to store large barrels of pre-mixed soda.
*Shelf Life:* Syrup and water last longer when kept separate.
*Customization:* Advanced machines (like the Coca-Cola Freestyle) use even more concentrated flavor cartridges and microdosing technology to mix dozens of different flavor combinations on the fly.