BigTreeTech Octopus v1.1 Board Prep and Wiring

This is the second video in my series on the BigTreeTech Octopus V1.1. In this video I walk through the board connections, considerations and show some crimping for the power terminals and JST connectors for optical endstops.

Disclaimer: BTT sent this board to me "free" and asked me to help get the word out on my views, and I happily obliged. I still had to purchase the steppers and do all the work to configure and install it which took a good day or so especially since the documentation is very sparse.

Amazon Affiliate Links (please use these- it helps me out!). As an Amazon Associate I earn from qualifying purchases.

BTT Octopus: https://amzn.to/3E6KYQH
Stepper Drivers: https://amzn.to/3AYchL2
Titan Ratcheting Crimper: https://amzn.to/3aKaONE
PA-09 Engineer Crimping tool: https://amzn.to/3aLgZB9
JST XH Connector Kit (Fan connectors, Motor Connectors, etc.): https://amzn.to/3BTMYuM

BTT Octopus Links:
Main Github Link:
https://github.com/bigtreetech/BIGTRE...

Manual
https://github.com/bigtreetech/BIGTRE...

Pinout:
https://github.com/bigtreetech/BIGTRE...