nanoVNA: A Practical Menu Walk Through (068a)

So you have just got a nanoVNA and it's a bit confusing. I don't blame you!
In this video I will walk through the menu of the nanoVNA with an eye to what it takes to get it set up to make a measurement of some sort.
I will explain all of those FORMAT options like:
LINEAR, REAL, IMAG, DELAY, POLAR, RESISTANCE, REACTANCE, SMITH and so on.
Some of these are a bit mysterious to those who are new to the whole VNA world.

My intent is that this will have some real practical implications for you.

======================
=== PROMISED LINKS ===
======================
Go-Along-With-The-Video-Sheet
https://drive.google.com/file/d/16rig...
nanoVNA Official Site (so they claim)
https://nanorfe.com/nanovna-v2.html
nanoVNA Manual (with menu map)
https://nanorfe.com/nanovna-v2-user-m...
Purchase nanoVNA V2 Plus 4 at
https://www.tindie.com/stores/hcxqsgr...

======================
==== VIDEO LINKS =====
======================
VIDEO: VNA Foundations (first video in the series)
   • VNA Introductions: What is it? and Wh...  
VIDEO: Q-Factor
   • Quality Factor (AKA: Q) Explained (059)  
VIDEO: Measuring Inductance, Capacitance and Impedance with the nanoVNA
   • Measure Impedance, Capacitance and In...  
VIDEO: Measuring stuff outside the 50-Ohm World of the nanoVNA
   • Making VNA Measurements in a non-50 O...  
=======================================

----------------------------------
Time Markers for Your Convenience
----------------------------------
00:05 Introductions
01:43 The Main Menu-An Overview
03:54 Getting Ready to Measure: Planning!
05:01 Setting up the nanoVNA
05:18 Configuring what I see on the screen.
05:35 The TRACE Option
07:26 Trace Format
08:22 Channel Selection
09:21 Reflection Coefficient: A little Background
11:36 Display Formats
11:37 LOG MAG
12:51 Phase
13:18 Delay
15:06 Smith
18:05 SWR
18:37 POLAR
20:29 LINEAR
21:16 REAL
21:49 IMAG
22:25 RESISTANCE
22:45 REACTANCE
23:07 Q FACTOR
24:46 Next Steps: Configure other Traces
25:08 Defining Test Frequencies
25:18 Start & Stop Frequencies
27:26 Center Frequency & Span
28:33 Setting up Markers
28:34 What is a marker?
29:09 Marker Setup
29:17 Select Markers
30:02 Marker formatting
30:38 Marker Use
32:09 Calibration
34:49 Parting comments and Toodle-oots