Скачать или смотреть A-Team Van(GMC Vandura-1983)

Get commercial license and download newest models cheaply-   / goodesign  
Download from
FAB365 - https://fab365.net/items/2427
For customers who do not use PayPal -   / team-van-gmc-149412202  

In the early days of developing my Foldable design, I applied the concept to a variety of vehicles — including a van. Among them, the one people requested the most was the iconic A-Team Van from the classic TV show The A-Team.

At the time, however, the model was based on a modified GMC Vandura platform, which meant I couldn’t fully capture the true shape and details of the real A-Team Van. That always stayed on my mind. This time, I’ve completely redesigned it from the ground up to finally do it justice.

I put a lot of effort into color separation, which means there are quite a few parts, and assembly — especially gluing — can be a bit tricky. But once completed, the result is incredibly satisfying!

The core structure of the Foldable design has been preserved, including the sliding side door. The rear doors can also be opened and closed, just like before.

Overall, it is not very difficult to print and assemble, but there are a few things you should pay attention to.

1. Some of the light parts have slanted sides so you don’t confuse left and right. Please make sure to check their orientation carefully before attaching them.
2. The parts that form the red stripe have slightly complex shapes and can be confusing. Please refer closely to the video and photos when assembling them.
3. Please double-check the position before attaching the sun visor.
4. When closing the rear doors, they must be closed together so they align and latch at the same time. If you try to close them one at a time, they may not shut properly. This is because the doors were designed to be slightly tight so they don’t open too easily.
5. When opening the sliding door, gently pull the upper starting point of the slider to make it easier to open. It may feel tight at first, but it will become smoother after opening and closing it a few times. If it is still too tight, there is a high chance that one of the red parts was attached incorrectly.

I hope this A-Team Van lets you relive the memories of The A-Team — the legendary series that even made it to the big screen.

1 : 38 scale
Largest part in printing, Size = X 92mm, Y 127mm, Z 15mm, After full assembly Size= X 58mm, Y 137mm, Z 58mm

Total Build Time : 29h / Plastic Weight : 104g