How to start Autoguiding in PHD2 | Astrophotography

In this beginner tutorial, I'll show you how to start autoguiding in PHD2. First I'll show you how to connect your guidescope and camera and what software you need to download to get started. Next, I'll explain how you can setup PHD2 and start your first autoguiding session. Finally, I'll also show you how to use the guiding assistant in PHD2 to improve your autoguiding.

Clear skies!

Wido - AstroForum.

Link to video previous video on autoguiding and selecting a guidescope and camera:
   • Autoguiding: Selecting a good Guidesc...  

IF YOU WANT TO SUPPORT ME, YOU CAN DO THE FOLLOWING:

1) SUBSCRIBE to my channel by clicking on the RED subscribe button on the right of the screen

2) Visit my website and give me some feedback or ask questions:
https://astroforumspace.com/

3) Buy some of my merchandise on my website here:
https://astroforumspace.com/shop/

4) Use one of my affiliate links to buy your Astrogear:
Astroshop (EU): https://bit.ly/3ijbZVZ
OPT (USA): https://bit.ly/3ikp9Sz
Amazon (worldwide): https://amzn.to/3gGLWaK

YOUR SUPPORT IS HIGHLY APPRECIATED!

Check out my website and instagram account here:

https://www.astroforumspace.com/
  / astroforum  

0:00 Introduction
0:56 How can I connect my guidescope and camera?
4:30 What software do I need to start autoguiding?
7:37 How should I setup my guidescope and camera in PHD2?
9:18 How can I start autoguiding in PHD2?
12:07 How to improve autoguiding with the guide assistant
16:03 Final thoughts