Скачать или смотреть How to jumpstart a peugeot partner van?

How to jumpstart a peugeot partner van?

To jumpstart a Peugeot Partner van, you will need a donor vehicle with a healthy battery and a set of jumper cables. Park both vehicles close but not touching, with their engines off. First, connect one red (positive) clamp to the positive (+) terminal of the Partner’s dead battery, then attach the other red clamp to the positive (+) terminal of the donor car's battery. Next, connect one black (negative) clamp to the donor vehicle's negative (-) terminal. Crucially, attach the final black clamp to a solid, unpainted metal point on the engine block or chassis of the Peugeot Partner, away from its battery, to create a safe ground connection. Start the donor vehicle and let it run for a few minutes before attempting to start the Partner. Once it starts, leave both running for several minutes. Finally, carefully remove the cables in the reverse order of connection and drive your van for at least 20 minutes to allow the alternator to recharge the battery.

Watch video:-    • How to jumpstart a peugeot partner van?  


If you have any question, please comment below.

Subscribe and support:-    / @quickfaq