How to Replace EGR Pressure Feedback Sensor 1993-1997 Ford Ranger

Buy Now!
New EGR Pressure Feedback Sensor (DPFE) from 1AAuto.com https://trq.video/ia-1AZMX00047

This video shows you how to install a new EGR pressure sensor on your 1993-1997 Ford Ranger. The EGR valve helps to reduce pollution by directing some exhaust gas back through the combustion chambers. The EGR pressure sensor relays information to the engine's computer so it can decide when to open and close the EGR valve.

This repair was done on a 1996 Ford Ranger XL 3.0L Extended Cab Pickup 2-Door RWD and the process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger

Tools you will need:
• 13mm Socket https://trq.video/oa9-1AXAA00015
• Needle nose pliers https://trq.video/ox-1AXAA00051
• Needle nose pliers https://trq.video/ox-1AXAA00052
• Pliers
• 9/32 Inch Socket https://trq.video/oa-1AXAA00018
• Ratchet https://trq.video/obz-1AXAA00016
• Socket Extensions https://trq.video/oa9-1AXAA00015

Subscribe:    / @trq  

Check out our playlist:
Ford Ranger 2nd Generation 1993-1997:    • Ford Ranger 2nd Generation 1993-1997  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.