Скачать или смотреть How to Install Skateboard Wheels & Skate Bearings - WarehouseSkateboards.com

How to Install Skateboard Wheels & Skate Bearings

Skateboard wheels are the part of your skateboard that allow you to move and help determine how fast you can go. Typically made of polyurethane, skateboard wheels come in a range of sizes, colors, and durability levels to suit your skateboard style and preference. Installing them properly is key; this video will show you how!
_________________________

You will need:
Deck with trucks assembled (see video:    • How to Mount Skateboard Trucks - Warehouse...  )
4 wheels
8 bearings
Skate tool

Products:

Skateboard wheels: warehouseskateboards.com/skateboard-wheels
Skateboard bearings: warehouseskateboards.com/bearings
Hardware: warehouseskateboards.com/hardware-sets
Skate tools: warehouseskateboards.com/skateboard-skate-tools
_________________________

Step 1:

Remove axle nuts and speed washers.
_________________________

Step 2:

Place bearing on the axle.
_________________________

Step 3:

Press the wheel over the bearing until you feel the bearing slide into the center of the wheel. Then insert the bearing spacer inside the wheel from the opposite side. If you hear a popping sound when you press the wheel onto the bearing it means the bearing is fully in. Do this for all four wheels.
_________________________

Step 4:

Place one speed washer on the axle of the skateboard truck.
_________________________

Step 5:

If you’re using a spacer, put it on the axle next. If not, install the wheel onto the axle.
_________________________

Step 6:

Place second washer on the axle.
_________________________

Step 7:

With your skate tool or wrench, fasten the nut until there is no play—the wheel should be able to spin freely.