90 Seconds Pizza in DIY IKEA Serving Bowl Oven

Converted an IKEA serving bowl into a pizza oven using an 1800 watts fan forced oven heating element. Reaches over 400 degrees celicius within 5 minutes and can cook a pizza in about 90 seconds.

List of items for building your own:
1. IKEA 36cm serving bowl: https://www.ikea.com/au/en/p/blanda-b...
2. Fan forced oven heating element: https://ebay.us/5QeLfC
3. An old frying pan handle
4. A 10 amp rated elecrical cable new or from an old appliance.
5. 1 bolt and a couple of screws
6. Electrical tape

For the bottom, you can use a pizza stone, a baking steel or what I used, a flat tawa: https://www.amazon.ae/Arobah-Aluminiu...

DISCLAIMER:
Any action you take upon information below is strictly at your own risk.

Steps:
1. Shape the heating element into a W shaped as seen in this video. Heating element is flexible and can easily be shaped by hand.
2. Drill 2 holes into the serving bowl and insert the two ends of the heating element from inside
3. Drill a couple of small holes and screw heating element into the bowl.
4. Drill another hole for attaching the handle using the bolt.
5. Connect wire ends to the heating element including ground wire to one of the screws that attach heating element to the bowl.
6. Using the eletrical tape, properly cover bare wires and secure the cable to the handle.