How to Replace Front Bumper Cover 2006-2011 Honda Civic

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-bR

This video shows you how to install a new front bumper cover from TRQ on your 2006-2011 Honda Civic. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!

This repair was done on a 2009 Honda Civic LX 1.8L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic

Tools you will need:
• Flat Blade Screwdriver https://trq.video/objt-1AXAA00013
• Phillips Head Screwdriver https://trq.video/objt-1AXAA00013
• Pocket Screwdriver
• 10mm Socket https://trq.video/obav-1AXAA00017
• 5mm Socket https://trq.video/obav-1AXAA00017
• Trim Tool Set https://trq.video/oabr-1AXXX00006
• 1/4 Inch Ratchet https://trq.video/obav-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/obup-1AXAA00015
• Gloves https://trq.video/o6u-1AXSS00048
• Safety Glasses
• 5mm Hex Socket

Subscribe:    / @trq  

Check out our playlist:
Honda Civic 2006-2011 8th Generation:    • Honda Civic 2006-2011 8th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.