Installing The Bridge™ Adapter | Dara Holster to Safariland® UBL

Описание к видео Installing The Bridge™ Adapter | Dara Holster to Safariland® UBL

How to Install a Safariland UBL Attachment to a Dara Holster Using the Bridge™ Adapter
In this step-by-step guide, we'll show you how to install the Safariland UBL onto a Dara Holster using the Bridge™ adapter from Dara Holsters. Follow these instructions to ensure a secure and reliable setup for your holster.

Product Link: https://daraholsters.com/the-bridge/

Unboxing and Preparation
When you open your package, you'll find the following items:

The Bridge™ adapter
Red, white, and blue hardware bags
A tube of Loctite
A card with a QR code linking to the instruction manual
The detailed instruction manual includes diagrams and a hardware matrix that indicates which screws and hardware to use for your specific holster and attachment. This can be found on the Dara Holster website.

Tools Needed
Number 2 Phillips screwdriver
Step-by-Step Installation
1. Prepare the Bridge and UBL
Gather three silver posts from the white hardware bag and six of the smallest screws (letter A) from the red hardware bag.
Align the holes of the Bridge with the Safariland UBL.
Insert the silver posts into the Bridge with the large backs facing you.
Loosely install a small Phillips head screw into each post.
2. Secure the Silver Posts
Tighten the screws until the backs of the posts are approximately 1/16th below the surface of the Bridge. This can be done with a hand screwdriver. Ensure each post is securely in place.
3. Attach the Bridge to the Holster
Remove the screws used to secure the posts temporarily.
Line up the Dara Holster with the corresponding holes on the Bridge.
Apply a small dab of Loctite to each screw to prevent the hardware from loosening over time.
Loosely install the screws into the holster, then tighten them slightly.
4. Final Tightening
Once all screws are lightly seated, tighten them fully. If you have a torque wrench, tighten to 25 in-lbs. Otherwise, hand-tighten with a screwdriver.
Periodically check your hardware to ensure nothing comes loose.
5. Reattach the UBL to the Bridge
Apply Loctite to the screws and align the UBL with the Bridge.
Snug the screws down to ensure all holes are aligned, then fully tighten them.

Your Safariland UBL is now securely installed onto your Dara Holster using the Bridge™ adapter. Always remember to periodically check your hardware to ensure everything remains tight and secure. For more detailed instructions, refer to the manual on the Dara Holster website. Happy holstering!

Join this channel to get access to perks:
   / @daraholstersandgear  

Комментарии

Информация по комментариям в разработке