Скачать или смотреть How to install anti-reversal latch? Modify Safety Anti-reversal Latch

#Modifytech #Airsoft #airsoftupgradeparts
Not only stop the AEG gears from reversing safely and efficiently

If you have the the following problems, you should chang your Anti-Reversal Latch.
1. You lost the spring of the anti-reversal latch when you install your gearbox parts.
2. You hurt or nearly hurt by the unreleased AEG spring when you open your gearbox.
3. You damaged the anti-reversal latch spring, which causing damage to the other internal parts.

Modify Innovative Anti-Reversal Latch
● Special E-Ring prevents lost of the spring.
● I-Shaped Groove on shaft allows AEGs spring release before opening gearbox.
● Add a pin to support the spring directly and friendly.

The original design of the Anti-Reversal Latch spring is the circle part on the spring goes around the smaller axle on the latch,
and the funky little part on the end of the spring goes up and hooks around the triangle shaped part sticking out from the axle.
With it, the latch would have tension to latch onto the bevel stops to stop the gears from backspin.
However, owing to the fast movement of the anti-reversal latch, about 20~50 cycles per second,
the original design of the spring would result it in a flexible fatigue, and would damage around the hook easily.
The little pieces of spring would be moved in the running gearbox and might cause damage to the other internal parts.

A small part gets the job done. Don’t make it loss too easy. That’s why we make the new design,
Modify Anti-Reversal Latch. Add a pin to support the spring directly and friendly.
Avoid the spring damage around the hook.

Modify Anti-Reversal Latch:
http://www.modify-tech.com/upgrade/ae...

不只是安全、有效阻擋電動槍齒輪逆轉

如果你有以下煩惱，你應該換逆止閥了…
1. 拆裝齒輪箱卻不小心彈飛了逆止閥上的小彈簧
2. 拆裝齒輪箱時差點被強力壓縮的電動槍彈簧傷到
3. 因為逆止閥彈簧斷裂導致齒輪箱裡面更多零件損壞

Modify打破傳統設計的逆止閥
● 增加E型扣可以防止小彈簧的遺失
● 軸心端面「一」字溝槽設計方便在打開齒輪箱前快速、安全釋放電動槍彈簧
● 直接支撐扭簧，簡單確實，避免斷裂

原本逆止閥彈簧的設計是繞著逆止閥本體包覆著，以達到扭簧牽引的功能，
但因為逆止閥的快速作動，一秒鐘可達20~50次。
舊有的造型設計加上快速反覆的動作，導致了彈簧物理性的彈性疲乏。
最終，在轉角處產生斷裂，斷裂的碎片有可能被齒輪重複擠壓，
產生齒輪箱內部不可預期的嚴重損壞。

零件雖小卻扮演著重要的角色且不應該輕易耗損，於是我們推出改良型的逆止閥。
造型簡單且一舉改善了彈簧斷裂的情形，避免彈簧在轉角處斷裂而喪失作用，
導致斷線在齒輪箱裡面移動使更多的零件損壞。

摩帝Modify - 逆止閥:
http://cn.modify-tech.com/upgrade/aeg...