Скачать или смотреть Mendota FV44i insert startup issue

fireplace ignites, then flames go out, then come back before finally staying out.
Expected behavior: flames stay on continuous at same height.
UPDATE: This is apparently a draft issue-- failure to establish intake and exhaust flow. It is resolved by turning on the pilot light for 5+ minutes. CPI is what you need vice IPI. Outside air temperature and wind speed are two of many variables affecting proper drafting.

The pilot can be set in the CPI (Continuous Pilot Ignition) mode to allow the pilot to remain on indefinitely by setting the remote control to CPI mode. If the remote control is set to the IPI (Intermittent Pilot Ignition) mode, the pilot will only light and remain ON while the main fireplace burners are operating.