How To Make Wind Turbine For Recharge a Battery

How To Make Wind Turbine For Recharge a Battery

I use for that radiator cooling fan motor , LM3608 (This module features the MT3608 2 Amp step up (boost) converter, which can take input voltages as low as 2V and step up the output to as high as 28V. The MT3608 features automatic shifting to pulse frequency modulation mode at light loads. It includes under-voltage lockout, current limiting, and thermal overload protection.

This module has a multi-turn trimpot (potentiometer) that you can use to adjust the output voltage. Since the trimpot has 25 turns of adjustment you can easily adjust the output of the module to exactly the voltage you need.

Boost converters are a great way to easily increase a given voltage, but that boost comes at the cost of less output current compared to input current.

Since this is a boost converter the output voltage has to be higher than the supplied input voltage.

If you need to decrease (step-down) a voltage consider using a buck converter such as our LM2596 buck converter module.

I also offer a 4A boost converter if you need more than the 2A of this module - XL6009E1 Boost Converter Module.)

youtube channel : https://www.youtube.com/c/mrtechnic?s...

Facebook:   / mrtechnic8  

Twitter:   / mrtechnic8  


If this video helped you out please don't forget to subscribe, give it a thumbs up or if you are feeling generous leaving a tip by clicking the " i " button on the top right corner of the screen. Thank you very much for your support!