Скачать или смотреть How To Program 2000 - 2006 Chevy Suburban Remote Key Fob - DIY Chevrolet Programming Pair Procedure

A DIY video tutorial on how to program or pair a remote key fob to a 2000 - 2006 Chevy Suburban. You will need an ignition key and all of the key fob remotes you want programmed to the Chevrolet Suburban in order to complete this programming procedure.

To program or pair a remote key fob to your Chevy Suburban:
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

This programming or pairing procedure applies to the following models of Chevrolet Suburban:
2000 Chevy Suburban
2001 Chevy Suburban
2002 Chevy Suburban
2003 Chevy Suburban
2004 Chevy Suburban
2005 Chevy Suburban
2006 Chevy Suburban

DIY keyless entry remote fob and smart key programming instructions available at https://www.ProgramYourRemote.com/

DIY Ignition key programming procedures available at https://www.ProgramAutoKeys.com/

Find a Locksmith in your area with https://www.LocateALocksmith.com