Strobe Light Repair

In this video Clay and I, mostly Clay, replace the "Hatch Plate" in a strobe lighting system manufactured by TWR. Their web site is www.twrlighting.com. This particular lighting system is the E1DB, a very prevalent strobe for cell, broadcast and communication towers under 501 feet. The "Hatch Plate" is like a chassis that is inside the beacon housing. Sometimes wires burn or major components become damaged. These components are replaceable but it is usually not practical to replace them while on the tower. The smart wayis to have the complete Hatch Plate, swap the good for the bad, then make the bad, good once again. This was Clay's first hatch plate.