Make Red Oak Look Ultra Modern | Making a DIY Trivet

I took a tile that I found at my home center and turned it into a really cool trivet! I was walking through my hardware store and stumbled across some cool tiles. I bought them knowing that I MUST turn them into something. The tiles were too cool not to. I decided that we need a trivet so that’s what I made. Most DIY trivets are a square, trimmed out with wood. They are a nice, clean look, but not what I was going for. I wanted to make my trivet for something larger, like for the main course of a meal. I made it rectangular with handles. That lets someone easily move it around if need to. Or, you can lay a spoon or ladle on it.

To make my trivet, I used tile, MDF, and red oak. I used dowel joinery to construct the whole project. I personally do not like the look for red oak or its grain. It’s too grainy for me. I used oak because I have a TON of it and it’s really cheap in my area compared to other hardwoods. To make that oaky oak look less oaky, I filled the grain using a slurry I mixed from water-based wood filler and water. The watered-down wood filler allows the filler to drip down into the pores and deep grain pockets of the wood. Since it’s water-based, it dries pretty fast. I sanded the trivet to 180 grit, just leaving the filler that was embedded into the grain.

I wanted to make my trivet black so it coordinates with the tile. I sprayed two coats of sanding sealer over the trivet, sanding with 400 grit between coats. I then sprayed the trivet with General Finishes black poly. It sprays like a dream! All I had to do was add a little hot glue, drop in the tile, and I had myself a stylish DIY trivet!

--⏱️Timestamps⏱️--
0:00 7 Make a Trivet
0:10 Picking Out Tile
0:44 Wood for the Trivet
1:29 Cutting the Wood Pieces
1:52 Dowel Joinery
2:41 Making handles
3:45 How to Cover Oak Grain
5:19 Sealing the Wood
6:32 Spraying the Oak Black

•• About NewtonMakes••
I’m Billy and I make fun things. Sometimes, it’s something I need like tool storage ideas. Other times it’s silly or nerdy stuff that I want to build. If you want to get ideas for making stuff, or just want to watch something entertaining then make sure you subscribe.

Like that sweet t-shirt I was wearing? Check it out here: https://newtonmakes.com/merch

•• My Links ••
Website: https://newtonmakes.com
Instagram:   / newtonmakes  
Facebook:   / newtonmakes  
Join this channel's Superhero membership to access perks:   / newtonmakes  

Here’s a list of tools and materials that I used to make this project. As an Amazon Associate I earn from qualifying purchases.
•• Tools & Materials ••
My Amazon Store: https://www.amazon.com/shop/newtonmakes
Table Saw: https://amzn.to/2RwQTJa
Planer: https://amzn.to/38LarPW
Makita drill: https://amzn.to/2U6DJnP
Dowel jig: https://amzn.to/3jCWgDX
Push Block: https://amzn.to/3IBPOrT
Forrest Woodworker II Saw Blade: https://amzn.to/3kezMHf
Titebond Wood Glue: https://amzn.to/2tU6B8d
Random Orbit Sander https://amzn.to/2RxjkXo
120 grit sandpaper: https://amzn.to/2QW835c
180 grit sandpaper: https://amzn.to/39y5kVM
General Finishes Black Poly: https://amzn.to/3upIGK7
General Finishes Sanding Sealer: https://amzn.to/3Kn1D5T
Floor tile: https://www.menards.com/main/flooring...

•• Pictures & Videos ••
Video by Gustavo Fring from Pexels
Video by Barbaravus (ASMR Nails on a Chalkboard)