Скачать или смотреть STOP Ignoring These Engine Seizure WARNING Signs! | RevNitro |

An engine seizure is a serious mechanical failure where the engine's moving parts lock up and can no longer operate. This usually happens due to insufficient lubrication, overheating, or mechanical failure. Here’s a breakdown:

🔧 Reasons for Engine Seizure
1. Lack of Lubrication
Cause: Low engine oil or oil pump failure.
Effect: Friction between metal parts increases, causing them to overheat and seize.

2. Overheating
Cause: Coolant leak, radiator failure, water pump malfunction, or blocked coolant passages.
Effect: Metal expands excessively and seizes due to heat distortion.

3. Oil Contamination
Cause: Dirt, water, or fuel mixing with oil.
Effect: Oil loses its lubricating properties, leading to part wear and seizure.

4. Incorrect Oil Grade
Cause: Using oil that’s too thick or too thin for your engine type.
Effect: Poor lubrication, especially at high or low temperatures.

5. Mechanical Failure
Examples: Broken piston rings, connecting rods, crankshaft failure.
Effect: Sudden seizure due to internal damage.

6. Running Without Oil (Dry Start)
Cause: After an oil change or rebuild, engine started without proper priming.
Effect: Immediate damage and seizure.

7. Two-Stroke Engine Issues (for bikers)
Cause: Incorrect fuel-oil mix or blocked oil injector.
Effect: Piston seizes inside the cylinder.

✅ How to Avoid Engine Seizure
✔️ 1. Regular Oil Checks
Check oil level every 1,000 km or as per your bike/car manual.
Look for oil color and viscosity; change if dirty.

✔️ 2. Use Recommended Oil
Always follow the manufacturer’s recommended oil grade and specification.

✔️ 3. Coolant Maintenance
Ensure coolant levels are adequate and the radiator is clean.
Replace coolant periodically.

✔️ 4. Warm Up the Engine
Especially for high-performance or cold-start conditions.
Let the engine idle for 30–60 seconds before riding hard.

✔️ 5. Don't Overload or Over-rev
Avoid riding at redline for long periods.
Use the right gear and avoid lugging the engine.

✔️ 6. Two-Stroke Engine Tips (if applicable)
Always use the correct oil-fuel mix ratio.
Ensure the oil injector is working (if separate system).

✔️ 7. Listen to Your Engine
Knocking, ticking, or excessive heating are early signs of trouble.

⚠️ Symptoms of a Seizing Engine
Sudden loss of power.
Engine stops and won’t restart.
Burning smell or excessive heat.
Unusual knocking or grinding noises.
In severe cases, visible smoke or piston lock-up.



Join this channel to get access to perks:
   / @revnitro  
Hit us @ Revnitro.com
Mail us : [email protected]
Follow us on Instagram :
  / revnitro_official