Скачать или смотреть Simplest way to make addressable LED strip (Neopixel) setup for cosplay lights

Items used:


Addressable LED strip (WS2812B - 5V): https://www.aliexpress.us/item/325680...
The strip in the video is 5 meters long with water resistance IP30 (no resistance, so no coating or sleeve) and 60 led density (5M 60 IP30). You will not get the plugs if you buy less than 5 meters/less than a full roll.
Arduino Nano Every: https://store.arduino.cc/products/ard...
pre-stripped usb power-only cables: https://www.aliexpress.us/item/325680...
Powerbank: mine was from Five Below/ convenience store etc

Tools I used:
Soldering station: https://www.amazon.com/gp/product/B08...
Wire stripper: https://www.harborfreight.com/profess...
Heat shrink: https://www.harborfreight.com/127-pie...

Software: https://www.arduino.cc/en/software
FastLED library: https://fastled.io/

extras:
3-pin JST plug: https://www.aliexpress.us/item/325680...
3-pin wire (thickness 22awg): https://www.aliexpress.us/item/325680...
on/off rocker switch: https://www.aliexpress.us/item/225183...


Facebook:   / willowcreativ  
IG:   / willowcreativ  
Twitter:   / willowcreativ  
Website: https://www.willowcreativ.com
Contact: [email protected]