How To Install Rockwell 2 in 1 Convertible Deep Freezer

How To Install Rockwell 2 in 1 Convertible Deep Freezer


Unpack the freezer and leave it idle for 2 hours.


Leave the machine idle with out running to allow the compressor oil to settle after the Shaking of the cooler during Transit Unloading or Un-packing.

Keep minimum 8 inches away from back and side walls. Don't place the cooler under direct sunlight. Don't keep anything in front of grills as it would block the air flow, reduce the cooling efficiency & increase the power consumption.

Plugin to a 5 ampere socket with proper earthing.

Run the freezer for 3 hrs to attain the temperature suitable for storing frozen products. This improves the freezing efficiency.

Temperature Setting

The freezer is equipped with an inbuilt automatic cutoff temperature controller. The Compressor turns off after the desired temperature is achieved & saves energy.

You can turn the temperature controller knob to adjust the temperature.


Freezer Cleaning

Don't clean the machine inside or outside with any acid or corrosive material.
Luke warm water and soft cloth can be used for cleaning.

Don't use sharp objects for defrosting as they may damage the body. Instead use plastic ice scraper.

Customer Care

In case of any complaint with the product, contact Rockwell Customer care. Do not get any local or unauthorized technician to open the product as this will make the warranty void.

Contact Rockwell Customer Care @ 739-608-2323/1860-208-2323 for service/ annual preventive maintenance/ warranty extension.
.
.
.
.
.
#Rockwell #deepfreezer #customercare #installation