D17 EM2 gets K-Pro and a AEM cam gear

The eBay EM2 gets a K-Pro, adjustable AEM cam gear, and a different reluctor wheel. This new reluctor wheel allows it to work with the k series K-Pro and because this car is a 2003 it uses a older style oxygen sensor. the K-Pro uses a newer wide band O2. We used a primary sensor from a 04-05 civic and added a AR ratio relay then wired everything up.

Below I included what I did to make the AF sensor work.

1. Cut pin 17 Black with Orange stripe on the C101 and connect car side to 86 on the relay.
2. T the pin 17 on C101 side to 87 on the relay and A22
3. And pig tail to E8 and connect to 85 on the relay.
4. Tap 30 on the relay to the White with black strip to main relay.
5. On the left junction connector under the cover over the valve cover cut the Green with yellow strip wire 3rd from the right and run a wire into the car and connect it to A16



@Gravy_built

#pnsearch needs a Honda show

For your performance parts needs enter discount code "Pirate10" for 10% off your purchase at
http://boostprojects-store.com