Fast FPV -This plane is on rails !

https://www.hyperflight.co.uk/product...
All up weight: 540g
120mph measured over 1 mile average. Duration is 6-7 minutes of full throttle per pack.
No flight controller or GPS in this build
DJI / Caddix HD camera and Vtx
20a Little Bee ESC
3A Amazon BEC
EZUHF with dipole antenna in the fin
T-motor F80 1900kv
4s1p LG-HG2 cells
5.25x6.25 APC prop
Home made servo covers, wet lay carbon vacuumed over a 3d printed pattern
3D printed camera holder
3d printed antenna holder
3D printed Caddix VTX holder
3D printed KST X08 servo trays (with m2 nuts melted into them)
3d printed motor mount extension with cooling
All 3d printed parts can be found here: https://www.thingiverse.com/thing:547...