Скачать или смотреть WRC Decal Kit Install

Order kit : https://n0daysoff.bigcartel.com/produ...

You need:

Razor (included)
Rubbing alcohol (Isopropyl 50 - 91% are fine)
Felt edged squeegee (Included)
Painters Tape

Do not applying in direct sunlight if it is over about 65 degrees outside. Clean application area well with rubbing alcohol including between the doors and in the cracks of the door handle. Can be applied over ceramic coat, but not waxes.

1: Painters tape elements of kit in place so you know where they go and that everything will fit how you want

2: Remove backing paper and apply vinyl

3: Squeegee decal onto car

4: Remove painters tape and clear transfer tape

5: Cut between panels and around door handle

6: ROLL edges around sides of panels

7: Heat with heat gun to fully activate adhesive (push down on vinyl while heated, pay special attention to adhesive, push straight down on bubbles with meat of your thumb if you see any) I use my gun on max setting, hold about 6 inches away and don't stay in one spot. You want the vinyl to get ~ 200 degrees F.