How to Replace Inner Tie Rod 2002-2005 Ford Explorer

Buy Now!
New Tie Rod Set from 1AAuto.com https://www.1aauto.com/*/i/1ASFK01260...
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE00317

This video shows you how to install an inner tie rod on your 2002-2005 Ford Explorer. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2002 Ford Explorer XLT 4.0L Sport Utility 4-Door and the process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer

Tools you will need:
• Pry Bar http://1aau.to/o8/1AXAA00020
• 21mm wrench
• 19mm Socket
• 21mm Socket
• Inner Tie Rod Removal Tool http://1aau.to/oe/1AXAA00438
• Pliers
• Ratchet http://1aau.to/oco/1AXAA00016
• Torque Wrench http://1aau.to/oa3/1AXAA00044
• Copper Anti-Seize
• Wire Ties
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Ford Explorer 2002-2005 3rd Generation:    • Ford Explorer 2002-2005 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.