How To Program keyless Entry remote for GM / Chevrolet / GMC 1998-2006

If you would like to leave a donation here is a link ...
https://www.paypal.com/cgi-bin/webscr... This video will show you how to program a new remote for many Chevrolet, GMC, Pontiac, and Cadillac vehicles.

My affiliated link to this part from amazon
https://amzn.to/34cznyT

DORMAN #13733

REMOTE PROGRAMMING:
Please make sure to read before attempting.
Any remotes not present at the time of programming will STOP working

- 1. Enter the vehicle, close, and unlock all doors using the power unlock switch on the driver’s door. Insert the key into the ignition but do not turn it yet.
- 2. Using the power unlock switch on the driver’s door, press and hold the switch in the unlock position.
- 3. While holding the switch in the unlock position, switch the key as far ON as it will go without starting the vehicle and back to OFF two (2) times, ending in the OFF position, then release the power unlock switch.

At this point the vehicle door locks should automatically lock and unlock, indicating that the programming mode has been activated.

- 4. Using any remote, press and hold down the “UNLOCK” and “LOCK” buttons simultaneously for 15-30 seconds until the door locks automatically lock and unlock. If 30 seconds pass while holding down the buttons and the vehicle door locks do not cycle, then the remote programming has failed and you must restart the programming from STEP 1.
- 5. Repeat STEP 4 for all remaining remotes you wish to program. You can program up to 4 remotes total.
- 6. Once you have programmed all of your remotes, exit the programming mode by switching the key to the ON position. The vehicle door locks will lock and unlock automatically indicating that the programming mode has been exited. Turn OFF the key and remove it as well as open and close the driver’s door.
- 7. Test all remotes to ensure they are functioning. If any did not program, restart the programming procedure from STEP 1 and switch the order in which you are programming the remotes.

This procedure was carried out on a 2003 CHEVY SILVERADO but will also work for the following vehicles

Cadillac
2003 2004 2005 2006 Escalade
Chevrolet
2003 2004 2005 2006 Avalanche
2005 2006 Equinox
2003 2004 2005 2006 Silverado
2007 Silverado Classic Body Style
2003 2004 2005 2006 Suburban
2003 2004 2005 2006 Tahoe
GMC
2003 2004 2005 2006 Sierra
2003 2004 2005 2006 Yukon
2003 2004 2005 2007 Hummer H2

IF YOU HAVE ANY QUESTIONS JUST ASK!

** If the video was helpful, remember to give it a "thumbs up" and subscribe. **


Follow me on INSTAGRAM
  / falcons_garage  

Twitter.
  / falcons_shop  

Garage's Facebook
  / falcons-performance-and-repair-shop-198292...  

Facebooks Hobbies
  / falconshobbies  

My Gaming Channel.
   / @falconsgaming  

Disclaimer:
Due to factors beyond the control of Falcons Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Falcons Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in my video. Use this information at your own risk. Falcons Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Falcons Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Falcons Garage