How to Replace Upstream Oxygen ( O2 ) Sensor 2011-2018 Ram 1500

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-72-bh

This video shows you how to install new TRQ oxygen sensors on your 2011-2018 Ram 1500. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.

This repair was done on a 2016 Ram 1500 Big Horn 5.7L Crew Cab Pickup 4-Door 4WD and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500

Tools you will need:
• O2 Sensor Socket
• Trim Tool Set https://trq.video/oRX-1AXXX00006
• Needle nose pliers https://trq.video/owK-1AXAA00051
• Needle nose pliers https://trq.video/owK-1AXAA00052
• 3/8 Inch Drive Ratchet https://trq.video/oaWQ-1AXAA00015
• Gloves https://trq.video/ot4-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Ram 1500 3rd Generation 2011-2018:    • Ram 1500 3rd Generation 2011-2018  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.